HU-LIFT

Err18

  • Cause of failure: 

    1. Drive motor Hall cable is damaged or broken

    2. Poor connection of motor Hall cable plug to controller

    3. Faulty motor Hall cable (ABF phase of motor Hall cable is not balanced)

    4. Faulty controller (ABF phase of motor Hall cable is balanced)

    Tool: Phillips screwdriver; multimeter; Allen wrench

    Please watch below videos to help identify the problem


Step1: Hall wires check and repair

Check if Hall wires are damaged

Way to repair the wires

Step2: Plug connection check and repair

Check pins of the plug

Repair pins of the plug

Step3: Motor damage check

Check motor resistance with multimeter

Copyright © 2023 HU-LIFT Spain Ltd. All rights reserved.